Sprecher + Schuh offers a wide range of low-voltage industrial control products, including contactors, a variety of relays, starters, push buttons, switches, terminals and controllers, to name a few. All of our products are crafted with precision and tested rigorously for performance — far exceeding industry standards. It is by this philosophy that Sprecher + Schuh has come to be known as the “Industrial control and protection consultants”.
Contactors
Sprecher + Schuh’s broad line of IEC and NEMA labeled contactors combine performance and reliability in space-saving designs that are well-proven and used the world over. On average, Sprecher + Schuh contactors are 30% smaller than traditional devices in the same horsepower range, yet provide millions of trouble-free operations for years of reliable use. Published SCCR ratings are available when combined with CEP7 overload relays and short-circuit fuses or molded case circuit breakers.
![]()
|
![]()
|
![]()
|
![]()
|
![]() |
Overload Protection
![]()
|
![]()
|
![]()
|
![]()
|
Enclosed Contactors + Open and Enclosed Starters
Sprecher + Schuh’s offering includes many standard as well as custom combination and non-combination starters. Sizes range from fractional to 900 HP with UL Listings and NEMA Sizes. Types include: manual and magnetic motor, explosion-proof, multi-speed, reduced voltage, autotransformer, wye-delta, part winding, simplex and duplex pump starters and custom multi-motor starter panels. Modifications include CPT, control relays, timers, additional auxiliaries, pilot devices, under voltage or over voltage phase monitors, and underload detection just to name a few. Combination starters are available in fused or non-fused, and molded case circuit breaker. Starters are available in NEMA/IP rated enclosures of all types, CSA approved, and CE certified.
Sprecher + Schuh is an ISO 9001:2008 certified manufacturer. Both the US and Canada facilities are UL-approved UL508 shops. Our Canadian shop is also CSA-certified. Upon customer request, we can build UL508-listed panels that satisfy the most rigorous UL inspection. And regardless of whether your panel has a UL508 listing, panels built by Sprecher + Schuh adhere to UL-mandated design and wiring standards. Sprecher + Schuh also offersAtex approved hazardous area starters on request.
![]()
|
![]()
|
![]()
|
![]() > Enclosed Motor Starter Configuration App
|
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
![]() Custom Control panels are available in a wide variety of custom combinations and configurations. Sprecher + Schuh works with the customer closely and custom orders can also be accompanied by approval drawings and schematics. For more information visit the custom controls section on www.sprecherschuh.com.
|
Intelligent Softstarters
![]()
|
![]()
|
![]()
|
![]()
Custom panels using the standard PCS and PFS Softstarters are an excellent choice for typical motor starting and soft stopping profiles. For customers seeking a control panel solution to reduce water-hammering or rapid fluid surges, our PFB Pump Control Softstarter is the market leader in this technology. The PFD Smart Motor Braking is the ideal solution for applications requiring motor braking capabilities. The strength of the braking current is adjustable from 0…400% of full load current. Upon request, custom Softstarter panels can be designed and labeled to meet UL508A requirements and /or Service Entrance requirements. Whether it’s an outdoor rated Type-12 with a drip shield, corrosive resistant Type-4X Non-Metallic or an ATEX Approved enclosure.
|
Motor Controllers + Molded Case Circuit Breakers
![]()
|
![]()
|
![]() The CLT7 Three-Component Controller combines a KTB7 controller, a CA7 contactor and a CEP7 Overload. CLT7 and reversing CLUT7 are cUL Approved for Type E applications and should be selected where KTB7 is used in place of the classic MCP, and the customer needs the features & functions of an electronic overload relay not available on KTA7/KTC7 as follows:
|
![]()
|
![]() > Go to the E-Catalog
|
![]() > Go to the E-Catalog (pdf)
|
![]() What Can We Build For You?Custom Multi-motor Type E/F Controllers Sprecher + Schuh experts are knowledgeable about motor control issues and help customers choose components that not only comply with UL, NEC and CSA standards but also maximizes the SCCR rating of the assembled multistarter panel, leading to increased protection of equipment and personnel. Multiple KTA7, KTB7 or KTC7 motor controllers plus matching CA7 contactors can be combined in a single assembly as a multi-motor starter custom control panel. Sprecher + Schuh has also teamed-up with Wöhner to supply 3-phase 60 mm bus bar systems. Bus Bar systems offers more flexibility, smaller and more economical alternative to a Motor Control Center that uses ‘bucket’ design. 3-Phase 60 mm Bus Bar Systems and panels Sprecher + Schuh has teamed-up with Wöhner to supply 3-phase 60 mm bus bar systems. Bus Bar systems offer more flexibility, a smaller and more economical alternative to a Motor Control Center that uses ‘bucket’ design. We sell bus bar components including a complete CAD design service for the system or we can assemble the bus bar with Sprecher + Schuh KT7, CA7 and CEP7 as required to meet customer needs.
|
Control, Timing + Solid State Relays
![]() > Go to the CS7 Relays E-Catalog (pdf) > Go to the CS8 Relays E-Catalog (pdf)
|
![]() > Go to the RZ7-FS E-Catalog (pdf) > Go to the RZ7-FE E-Catalog (pdf)
|
![]()
|
![]()
|
Pilot Devices
![]()
|
Signaling Solutions by Auer Signal
Sprecher + Schuh’s is the exclusive distributor of warning tower lights, beacons, horns, and signaling alarms from Auer Signal in the United States and Canada. The complete line of Auer signaling devices combine performance and reliability that are well-proven and used the world over. The Auer Signal plant in Vienna, Austria is an ISO 9001 facility manufacturing high quality visual and audible signaling equipment since 1910.
![]() |
![]() > Go to the E-Catalog |
![]() The halfDome 90mm wide towers are a sleek enclosed unit only 45mm deep. These towers have a universal, industrial design suitable for a wide variety of applications > Go to the E-Catalog
|
![]()
|
![]()
|
Rotary Cam Switches
![]()
|
R-Line Series Rotary Cam SwitchesSprecher + Schuh’s rugged R-Line rotary cam switches are available for most control and load applications up to 40 amps. Available in standard and nonstandard configurations that are often available off the shelf. Various cam switch types include Changeover Switches, ON/OFF Switches, Multi-position Load Switches, Motor Load Disconnect Switches, Reversing Switches and Wye-Delta Switches. |
Motor Disconnect Switches
![]()
|
![]()
|
Circuit Protection
![]()
|
![]() > Go to the E-Catalog (pdf)
|
![]()
|
Terminal Blocks
![]() Terminal Marking System Sprecher + Schuh’s V7-W are accompanied by standard blank or preprinted marker cards, or can be custom marked with the EK VarioSign Software and Plotter system. |
Power Supplies by Adel Power
![]()
|